Product code: KCVSUKIT.012.BK
Complete 3 Metres of surface mounted Crystal View System, which includes:
- 3 metres of base channel
- 6 metres of gasket
- 2 x 3 metres of top seal
- 24 clamp bars & bolts
- 12 glass clamps
No need for additional cladding as the profile is supplied in a brushed black finish. Available for 12m..
€430.19 Ex. VAT
Product code: KCVSUKIT.013.BK
Complete 3 Metres of surface mounted Crystal View System, which includes:
- 3 metres of base channel
- 6 metres of gasket
- 2 x 3 metres of top seal
- 24 clamp bars & bolts
- 12 glass clamps
No need for additional cladding as the profile is supplied in a brushed black finish. Available for 12m..
€430.19 Ex. VAT
Product code: KCVSUKIT.015.BK
Complete 3 Metres of surface mounted Crystal View System, which includes:
- 3 metres of base channel
- 6 metres of gasket
- 2 x 3 metres of top seal
- 24 clamp bars & bolts
- 12 glass clamps
No need for additional cladding as the profile is supplied in a brushed black finish. Available for 12m..
€430.19 Ex. VAT
Product code: KCVSUKIT.017.BK
Complete 3 Metres of surface mounted Crystal View System, which includes:
- 3 metres of base channel
- 6 metres of gasket
- 2 x 3 metres of top seal
- 24 clamp bars & bolts
- 12 glass clamps
No need for additional cladding as the profile is supplied in a brushed black finish. Available for 12m..
€430.19 Ex. VAT
Product code: KCVSUKIT.019.BK
Complete 3 Metres of surface mounted Crystal View System, which includes:
- 3 metres of base channel
- 6 metres of gasket
- 2 x 3 metres of top seal
- 24 clamp bars & bolts
- 12 glass clamps
No need for additional cladding as the profile is supplied in a brushed black finish. Available for 12m..
€430.19 Ex. VAT
Product code: KCVSUKIT.021.BK
Complete 3 Metres of surface mounted Crystal View System, which includes:
- 3 metres of base channel
- 6 metres of gasket
- 2 x 3 metres of top seal
- 24 clamp bars & bolts
- 12 glass clamps
No need for additional cladding as the profile is supplied in a brushed black finish. Available for 12m..
€430.19 Ex. VAT
Product code: KCV002BK
This is the main section that holds the glass.
It is pre-drilled at 100mm from the ends and then 200mm thereafter.
The hole is to suit a 12mm fixing bolt and is counter bored to sink the bolt head...
€310.16 Ex. VAT
Product code: KCV006BK
Stainless steel end caps cut to suit the surface mounted channel.
An adhesive will be needed to hold the end cap in place...
€29.57 Ex. VAT
Product code: KCV010
These are installed between the channel and the substrate to allow free flow of water to drain out of the system.
W = 72mm H = 10mm L = 90mm..
€3.93 Ex. VAT
Product code: KCV035
Additional gasket can be supplied in any length.
This gasket suits 12mm to 17.5mm thick glass.
Small gasket is also available for 19mm to 21.5mm...
€3.47 Ex. VAT
Product code: KCV037
Balcony Seal® is a revolutionary product that provides a solution to both water drainage and waterproofing on a balcony installation. It comprises of drain blocks that sit underneath the balustrade channel. Notches on the top side of the drain blocks locate into the rebates of the Crystal View chann..
€99.08 Ex. VAT
Product code: KCV090BK
A prefabricated 90 degree corner supplied to reduce the amount of cutting needed on sites.
On a standard balcony with 90 degree corners the installer only needs to make straight cuts...
€117.45 Ex. VAT
Product code: KCV003BK.ALU
The top trim holds the gasket in place and is pressed onto the channel at the end of the installation.
It covers the clamps from view and prevents debris from entering the channel...
€16.20 Ex. VAT
Product code: KCV008
Specially designed 10mm spanner used for tightening and adjusting the glass in the channel...
€9.26 Ex. VAT
Product code: KCV009
These dowels are used for joining two channels and ensure a strong and accurate joint.
Sold separately.
Two dowels needed per joint.
These can be used with both the Crystal View and Mega Grip systems...
€1.59 Ex. VAT
Product code: B0012
VistaLevel enables the quick horizontal positioning of glass panes. Fasten the little helper in a way that you can keep an eye on it during installation.
The proven vacuum technology of the VistaLevel® suction pad holds it safely in place. Now you have both hands free to comfortably align the ..
€54.18 Ex. VAT
Product code: KCV012
Complete Glass Clamp kit, includes:Clamp kits have enough components to suit a 3 metre length of channel.
The clamps can fit glass thicknesses 1mm either way of said glass thickness i.e. 15mm glass clamps will suit 14mm to 16mm glass.
Included are the clamp bars, which sit into the top mould of t..
€87.66 Ex. VAT
Product code: KCV013
Clamp kits have enough components to suit a 3 metre length of channel.
The clamps can fit glass thicknesses 1mm either way of said glass thickness i.e. 15mm glass clamps will suit 14mm to 16mm glass.
Included are the clamp bars, which sit into the top mould of the clamps and the clamp bolts, whic..
€87.66 Ex. VAT
Product code: KCV015
Clamp kits have enough components to suit a 3 metre length of channel.
The clamps can fit glass thicknesses 1mm either way of said glass thickness i.e. 15mm glass clamps will suit 14mm to 16mm glass.
Included are the clamp bars, which sit into the top mould of the clamps and the clamp bolts, whic..
€87.66 Ex. VAT
Product code: KCV017
Clamp kits have enough components to suit a 3 metre length of channel.
The clamps can fit glass thicknesses 1mm either way of said glass thickness i.e. 15mm glass clamps will suit 14mm to 16mm glass.
Included are the clamp bars, which sit into the top mould of the clamps and the clamp bolts, whic..
€87.66 Ex. VAT
Product code: KCV019
Clamp kits have enough components to suit a 3 metre length of channel.
The clamps can fit glass thicknesses 1mm either way of said glass thickness i.e. 15mm glass clamps will suit 14mm to 16mm glass.
Included are the clamp bars, which sit into the top mould of the clamps and the clamp bolts, whic..
€87.66 Ex. VAT
Product code: KCV021
Clamp kits have enough components to suit a 3 metre length of channel.The clamps can fit glass thicknesses 1mm either way of said glass thickness i.e. 15mm glass clamps will suit 14mm to 16mm glass.Included are the clamp bars, which sit into the top mould of the clamps and the clamp bolts, which scr..
€87.66 Ex. VAT
Showing 1 to 23 of 23 (1 Pages)